Aerial work platform is a professional aerial work equipment that lifts workers, tools, materials, etc. to a certain position through the platform for construction, installation, maintenance and other work. It is increasingly used in construction.
The scissor-type aerial work platform has low noise, small turning radius, strong applicability, high work efficiency, safety and convenience, various height options, and is suitable for various climbing operations: workshop maintenance, indoor building maintenance, high-rise glass cleaning, water and electricity pipe inspection and maintenance, etc. It has promoted the process of mechanization of construction and greatly reduced the labor intensity of aerial work during construction.
The mechanical system of the scissor-type aerial work platform consists of a workbench, a bracket, a power module, etc. The scissor-type lift is a widely used aerial work equipment. Its scissor-type mechanical structure makes the lifting platform more stable, and the wide working platform and large carrying capacity make the aerial work range larger and suitable for multiple people to work at the same time. It makes aerial work more efficient and safer.
1. Quiet and convenient It uses batteries as the power source, with low noise and zero emissions during operation. It is suitable for indoor places such as factory workshops, logistics warehouses, and hotels.
2. Mobile and flexible The scissor-type aerial work platform adopts full-proportional handle control. Whether it is lifting or walking, it is realized on the handle control, which is simple and fast to operate. The smaller turning inner radius can be used in a narrow space and can also easily change positions. It has two walking speeds to ensure that the equipment moves quickly and moves safely when rising.
3. The large platform on the working surface is equipped with an extension platform, which makes it easier for the operator to approach the construction site and break through spatial obstacles. The platform has good stability, a wide working platform and a high carrying capacity, which makes the aerial work range wider and suitable for multiple people to work at the same time. It makes aerial work more efficient and safer.
4. Small size Small size, light weight, the workbench railing can be folded or disassembled, which reduces the height of the whole machine, making it easy to transport and pass through narrow entrances and other places.
The aerial work platform equipment is equipped with safety protection devices and protective measures, but it can only work if it is properly operated, maintained and used. Therefore, the key points of safety control of scissor-type aerial work platforms should be kept in mind:
1. The body of the scissor-type aerial work platform should be labeled with the following information: the lifting speed limit, rated load capacity, maximum lifting height, manufacturer's name and production date, etc. of the lifting platform;
2. Scissor-type aerial work platform operators must participate in fall protection and lift training before they can start operating the equipment;
3. Personnel using scissor-type aerial work platforms must wear full-body safety belts;
4. During the lifting process, the lift will hang the safety belt on the platform, basket or manufacturer-made tie-down points. When the scissor-type aerial work platform is lifted to the working height, the safety belt is no longer hung on the scissor-type aerial work platform, but should be hung on other reliable hanging points of the structure;
5. The working area of the scissor-type aerial work platform must be maintained with warning tape, warning signs, and full-time supervisors;
6. When the scissor-type aerial work platform is in the rising starting position, the operator cannot leave;
7. The installed scissor-type aerial work platform must be inspected and accepted by the on-site safety engineer before use, and can only be put into use after the permission sign is hung;
8. The user of the scissor-type aerial work platform must operate and use it in accordance with the operating procedures of the lifting vehicle;
9. Inspections must be carried out before daily use, and the inspection form must be filled in;
10. The working area of the scissor-type aerial work platform must be on an open flat ground, and it is not allowed to operate on bumpy and uneven ground;
11. The legs of the scissor-type aerial work platform must be fully opened and firmly supported.
