How to lubricate an electric scissor lift?
As a trusted electric scissor lift supplier, I understand the importance of proper maintenance to ensure the longevity and optimal performance of these valuable pieces of equipment. One of the most critical maintenance tasks is lubrication, which significantly affects the smooth operation and reliability of an electric scissor lift. In this blog, I'll guide you through the process of lubricating an electric scissor lift.
Why Lubrication Matters
Before delving into the lubrication process, it's essential to understand why lubrication is so crucial for electric scissor lifts. Lubricants serve several key functions, including reducing friction between moving parts, preventing wear and tear, protecting against corrosion, and dissipating heat. By applying the right lubricant at the appropriate intervals, you can minimize downtime, reduce repair costs, and extend the lifespan of your scissor lift.
Pre-Lubrication Checks
Before you start lubricating your electric scissor lift, it's important to perform a few pre-lubrication checks to ensure the safety and effectiveness of the process. First, make sure the lift is turned off and the power supply is disconnected. This will prevent any accidental movement or electrical shock during the lubrication process. Next, inspect the lift for any signs of damage or wear, such as loose bolts, cracked welds, or worn-out parts. If you notice any issues, address them before proceeding with lubrication.
Choosing the Right Lubricant
Selecting the appropriate lubricant is crucial for the proper maintenance of your electric scissor lift. The type of lubricant you need will depend on several factors, including the specific components of the lift, the operating conditions, and the manufacturer's recommendations. Generally, you'll need a high-quality grease or oil that offers excellent lubrication, corrosion protection, and temperature resistance.
For the scissor arms and pivot points, a lithium-based grease is often recommended. Lithium grease has good adhesion properties, which helps it stay in place even under heavy loads and high temperatures. It also provides excellent protection against rust and corrosion, making it ideal for outdoor or humid environments.
For the hydraulic system, you'll need a hydraulic oil that meets the specifications of your lift's hydraulic pump and cylinders. Hydraulic oil is designed to transfer power efficiently, reduce friction, and protect against wear and tear. Make sure to use the correct viscosity of hydraulic oil, as specified in the lift's manual.
Lubricating the Scissor Arms and Pivot Points
The scissor arms and pivot points are the most critical components to lubricate on an electric scissor lift. These parts experience high levels of friction and stress during operation, so regular lubrication is essential to prevent premature wear and ensure smooth movement.
- Clean the Components: Before applying lubricant, use a clean cloth or brush to remove any dirt, debris, or old lubricant from the scissor arms and pivot points. This will ensure that the new lubricant can adhere properly and provide maximum protection.
- Apply the Grease: Using a grease gun, apply a small amount of lithium-based grease to each pivot point and moving joint on the scissor arms. Make sure to distribute the grease evenly and cover all surfaces. Be careful not to over-lubricate, as excess grease can attract dirt and debris, which can cause additional wear.
- Work the Grease In: After applying the grease, operate the scissor lift up and down a few times to work the grease into the components. This will help ensure that the grease is evenly distributed and reaches all the necessary areas.
Lubricating the Hydraulic System
The hydraulic system is responsible for raising and lowering the scissor lift, so it's essential to keep it properly lubricated to ensure smooth and reliable operation.
- Check the Hydraulic Fluid Level: Before adding any hydraulic fluid, check the fluid level in the reservoir. The fluid level should be between the minimum and maximum marks on the dipstick. If the fluid level is low, add the recommended hydraulic oil until it reaches the proper level.
- Flush the Hydraulic System (if necessary): If the hydraulic system has been contaminated or if it's due for a major service, you may need to flush the system. Flushing the system involves draining the old hydraulic fluid, cleaning the reservoir and filters, and refilling the system with fresh fluid. Follow the manufacturer's instructions when flushing the hydraulic system.
- Add Fresh Hydraulic Fluid: If the hydraulic fluid level is low but the system doesn't need to be flushed, simply add the recommended hydraulic oil to the reservoir until it reaches the proper level. Make sure to use the correct type and viscosity of hydraulic oil, as specified in the lift's manual.
Lubricating Other Components
In addition to the scissor arms, pivot points, and hydraulic system, there are several other components on an electric scissor lift that may require lubrication, including the wheels, bearings, and chains.
- Wheels and Bearings: Check the wheels and bearings for any signs of wear or damage. If necessary, clean the wheels and bearings with a degreaser and apply a small amount of lubricating oil to the bearings. Make sure to rotate the wheels to distribute the oil evenly.
- Chains: If your scissor lift is equipped with chains, inspect them for any signs of wear or damage. Clean the chains with a degreaser and apply a light coating of chain lubricant to prevent rust and corrosion.
Maintenance Schedule
To ensure the long-term performance and reliability of your electric scissor lift, it's important to follow a regular maintenance schedule that includes lubrication. The frequency of lubrication will depend on several factors, including the usage of the lift, the operating conditions, and the manufacturer's recommendations.
As a general guideline, it's recommended to lubricate the scissor arms and pivot points every 50 hours of operation or at least once a month, whichever comes first. The hydraulic system should be checked and the fluid level should be topped up as needed, and the fluid should be changed according to the manufacturer's recommended intervals, typically every 500 - 1000 hours of operation or once a year.
Conclusion
Proper lubrication is essential for the smooth operation and longevity of an electric scissor lift. By following the steps outlined in this blog and using the right lubricants, you can minimize wear and tear, reduce the risk of breakdowns, and ensure the safety and reliability of your lift.
If you're in the market for a high-quality electric scissor lift, I encourage you to explore our range of products, including the Latest Design Small Electric Scissor Lift, Electric Scissor Lift Platform, and High Performance Electric Platform Lift. Our lifts are designed with the latest technology and built to last, providing you with reliable and efficient performance for your lifting needs.
If you have any questions about our products or need assistance with lubrication or maintenance, please don't hesitate to reach out. We're here to help you make the right choice and ensure that your equipment operates at its best. Let's start a conversation about your specific requirements, and we can discuss how our electric scissor lifts can meet your needs.


References
- Manufacturer's manuals for electric scissor lifts
- Industry standards for lift maintenance and lubrication
- Technical literature on hydraulic systems and lubrication
- Expert advice from experienced lift technicians
