Common faults and solutions of electric scissor lifts

Jul 08, 2024 Leave a message

info-900-500

 

As an efficient and safe aerial work equipment, electric scissor lift platform is widely used in various fields. However, in the long-term use process, some faults are inevitable. Understanding these common faults and their solutions can help users quickly troubleshoot problems and ensure the normal operation of the equipment. As a SWLLIFT brand that specializes in the production of scissor lift platforms, we have summarized some common faults and their solutions, hoping to provide users with practical reference.

 

1. The platform does not rise and fall

Cause of failure:

Battery power is low or battery is damaged.

Control system failure.

Insufficient hydraulic oil or hydraulic cylinder failure.

Motor or hydraulic pump failure.

 

Solution:

Check the battery power and charge or replace the battery if necessary.

Check the control panel and controller to ensure normal connection and replace the controller or electronic control components if necessary.

Check the hydraulic oil level and replenish the hydraulic oil if necessary; check whether the hydraulic cylinder is leaking or damaged, and repair or replace it if necessary.

Check the motor and hydraulic pump to ensure its normal operation and replace the faulty parts if necessary.

 

2. Abnormal platform lifting speed

Cause of failure:

Inappropriate hydraulic oil viscosity.

There is air in the hydraulic system.

Failure of hydraulic valve or hydraulic pump.

The load is too heavy.

 

Solution:

Replace the hydraulic oil that meets the requirements and ensure that its viscosity is suitable for the current working environment.

Exhaust the air in the hydraulic system. You can exhaust it by loosening the exhaust screw of the hydraulic cylinder.

Check the hydraulic valve and hydraulic pump to ensure their normal operation and replace the faulty parts if necessary.

Confirm that the platform load is within the rated range to avoid overloading.

 

3. Motor overheating

Cause of failure:

Long-term continuous work.

Poor heat dissipation of the motor.

Overload operation of the motor.

 

Solution:

Avoid long-term continuous work, stop the machine regularly for rest, and ensure that the motor has enough cooling time.

Check the motor heat sink and fan to ensure their normal operation. If necessary, clean the dust on the heat sink or replace the fan.

Ensure that the platform load is within the rated range to avoid overloading the motor.

4. Hydraulic system leakage

 

Cause of failure:

Loose hydraulic pipes or joints.

Damaged hydraulic cylinder seals.

Hydraulic pump or valve failure.

 

Solution:

Check the hydraulic pipes and joints to ensure that they are tight and not loose. Re-tighten or replace the seals if necessary.

Check the hydraulic cylinder to ensure that the seals are intact and replace the seals if necessary.

Check the hydraulic pump and valve to ensure that they are operating normally and replace the faulty parts if necessary.

V. Control system failure

 

Cause of failure:

Control panel or joystick failure.

Controller or sensor failure.

Poor electrical circuit connection.

 

Solution:

Check the control panel and joystick to ensure that they are operating normally and replace the faulty parts if necessary.

Check the controller and sensor to ensure that they are operating normally and replace the faulty parts if necessary.

Check the electrical circuit to ensure that the connection is tight and not loose, and reconnect or replace damaged wires if necessary.

VI. The platform is tilted or unstable

 

Cause of failure:

Uneven ground or unstable support.

Scissor arm or hinge parts are worn.

Uneven pressure in the hydraulic system.

 

Solution:

Ensure that the platform is operated on a flat and solid ground, and use support feet or pads to adjust the level if necessary.

Check the scissor arm and hinge parts to ensure that there is no wear or deformation, and lubricate or replace worn parts if necessary.

Check the hydraulic system to ensure that the hydraulic oil pressure is balanced, and adjust the hydraulic system pressure or replace the hydraulic pump if necessary.

Electric scissor lifts may have various faults during use. Understanding these common faults and their solutions can help users quickly troubleshoot problems and ensure the normal operation of the equipment. The SWLLIFT brand is committed to providing customers with high-quality electric scissor lifts and providing comprehensive technical support and after-sales service. I hope this article can provide users with practical references to help you better use and maintain electric scissor lifts to ensure the safety and efficiency of aerial work.