
Nowadays, electric forklift gradually replaces the internal combustion forklift and is favoured by various industries, and is widely used in warehouses, logistics, and terminals, and many enterprises will buy 3t electric forklift in large quantities for transporting and loading/unloading goods. Out of the requirement of working efficiency, many drivers start to use the new forklift directly after getting it.
In fact, like family cars, it is better not to use a new electric forklift immediately after purchasing it, and you should recognise and check its relevant parameters and configuration, and test the functions. The following is the electric forklift manufacturer's introduction to what operations should be done before using the newly purchased 3t electric forklift.
Firstly, check whether the tyre pressure of the 3t electric forklift is sufficient and whether the accompanying tools and accessories are complete.
Next, it is necessary to check whether the electrical parts of the 3t electric forklift and the connectors and wiring of all parts of the pipeline are intact and have been connected, check whether the lighting equipment is normal, and whether the electrical instruments and horn can work properly.
Next, you need to check if the battery is fully charged.
Electric forklift manufacturer tips - 3t electric forklift can only use the current generated by the battery, do not use rectified alternating current, to avoid damage to electronic components.
1. Not only should the inspection be carried out, but the driver should also get his hands on the test.
2. Wear the correct labour protection equipment, fasten the safety belt, try to turn on the power switch and start the 3 ton electric forklift. Starting or stopping should be done slowly to prevent danger.
3. If you need to change the driving direction while driving, you should release the accelerator pedal first and then turn the steering wheel.
Electric forklift truck manufacturer's tip - When the electric forklift truck is travelling, the load should preferably be the lowest, do not overload, and the height of the forks from the ground should not be more than 300mm, which can make the driver safer and easier to commission.
Everyone knows that a newly bought family car should be inspected and test-driven, and so is the 3t electric forklift. If you encounter problems or operating difficulties, enterprises and drivers do not need to be anxious, swllift electric forklift manufacturers with 24-hour online service and perfect after-sales system, will also carry out two free product safety training, in order to ensure that the driver safely and quickly get started to use the new electric forklift at the same time, to improve the economic benefits of enterprises.





